您的位置: 首页 » 法律资料网 » 法律法规 »

黑龙江省全民所有制企业职工退休费社会统筹试行办法

时间:2024-05-26 01:36:10 来源: 法律资料网 作者:法律资料网 阅读:9939
下载地址: 点击此处下载

黑龙江省全民所有制企业职工退休费社会统筹试行办法

黑龙江省人民政府


黑龙江省全民所有制企业职工退休费社会统筹试行办法
黑龙江省人民政府



根据我国《宪法》和第七个五年计划有关发展社会保障事业的精神,为给经济体制改革创造良好的外部条件,增强企业活力,本着合理均衡企业负担,保障退休职工生活的原则,特制定本办法。
第一条 凡省内经济独立核算、实行国家统一规定的退休制度的全民所有制企业(包括除铁路以外的所有中直企业),不分隶属关系,均应在企业所在地参加职工退休费的社会统筹。
由民政部门管理的退休人员,暂不列入统筹范围。
第二条 用于支付退休职工各项待遇的费用均应实行社会统筹。根据我省实际情况,本着由少到多、逐步扩大的原则,目前统筹项目暂定为:
(一)离、退休费和退职人员生活费;
(二)符合国发〔1985〕6号文件规定的生活补贴费;
(三)副食品价格补贴、肉价补贴、粮煤价格补贴、取暖补贴;
(四)因工残废护理费。
实行职工退休费社会统筹后,离、退休职工和退职职工与企业的关系不变。凡暂未列入统筹项目的医疗、生活、福利费用等,仍按现行规定由原单位负责支付。
第三条 以上列入统筹项目的费用构成退休费统筹基金(以下简称统筹基金)。列入统筹项目的各项费用由统筹专管机构按照国家和省规定的标准统一征集、支付、管理。具体发放办法,由各市、县自行确定。
第四条 统筹基金的提取数额由统筹专管机构依据所有参加统筹的企业全部在册职工工资总额为基数,按照统筹项目的所需费用,本着“以支定筹、略有节余”的原则,统一测算,核定提取比例,经市、县退休基金社会统筹领导小组批准后,公布实施。国家对离、退休职工的待遇有重
大变动,需要调整统筹基金提取比例时,由统筹专管机构报请市、县人民政府批准。
参加退休基金社会统筹的企业均应按照规定的提取比例、缴纳日期,向统筹专管机构缴纳统筹基金。逾期不交的按日罚缴千分之五滞纳金。罚缴的滞纳金转入统筹基金。
第五条 统筹基金实行先存后用。参加统筹的企业,须预交一个月的统筹基金做为周转资金。
第六条 参加统筹的企业可在税前提取统筹基金,列营业外支出。统筹基金的收支管理,要接受财政、税务、审计、银行、工会等部门的监督。
对按照统一提取比例缴纳统筹基金确有困难的亏损、微利企业,在没有扭亏增盈之前,各级财政部门应给予必要的支持,以保证统筹工作的顺利进行。
第七条 参加统筹的企业,要与当地统筹管理机构签订统筹合同。统筹基金要委托当地专业银行采取“托收无承付”的办法结算,免交手续费,以社会保险专户存入,专款专用,不得挪用。其存款利息,在国家没有统一规定前,按个人存款计息。所得利息要全额转入统筹基金项下。
第八条 为搞好统筹基金的收支管理,应建立统一的会计科目、记帐规则和报表制度。具体事宜由市、县统筹管理机构与当地财政部门共同制定。
第九条 企业要严格按照国家和省的有关政策规定办理职工的离休、退休和退职手续。对不符合政策规定的离、退休和退职人员,统筹管理机构有权拒付退休费用,并向有关部门报告。
第十条 参加统筹的企业如关、停、并、转时,原离休、退休和退职人员的归宿及应上缴的统筹基金,由企业主管部门负责处理,报市、县统筹管理机构办理手续。
第十一条 各市、县都要成立退休费社会统筹领导小组,下设统筹基金专管机构。统筹基金专管机构列事业编制,暂隶属同级劳动部门领导。其主要职责是:收缴、管理、发放统筹基金。所需经费从统筹基金中解决。
第十二条 各市、县可依据本试行办法,制定具体实施细则,报当地人民政府批准后实施。
第十三条 本办法如与国家有关规定相抵触时,由省劳动局按国家规定修改。本办法从颁发之日起试行,并授权省劳动局解释。




1986年6月9日

中华人民共和国计量法实施细则(附英文)

国务院


中华人民共和国计量法实施细则(附英文)

(一九八七年一月十九日国务院批准)

第一章 总 则
第一条 根据《中华人民共和国计量法》的规定,制定本细则。
第二条 国家实行法定计量单位制度。国家法定计量单位的名称、符号和非国家法定计量单位的废除办法,按照国务院关于在我国统一实行法定计量单位的有关规定执行。
第三条 国家有计划地发展计量事业,用现代计量技术装备各级计量检定机构,为社会主义现代化建设服务,为工农业生产、国防建设、科学实验、国内外贸易以及人民的健康、安全提供计量保证,维护国家和人民的利益。

第二章 计量基准器具和计量标准器具
第四条 计量基准器具(简称计量基准,下同)的使用必须具备下列条件:(一)经国家鉴定合格;(二)具有正常工作所需要的环境条件;(三)具有称职的保存、维护、使用人员;(四)具有完善的管理制度。符合上述条件的,经国务院计量行政部门审批并颁发计量基准证书后,方可使用。
第五条 非经国务院计量行政部门批准,任何单位和个人不得拆卸、改装计量基准或者自行中断其计量检定工作。
第六条 计量基准的量值应当与国际上的量值保持一致。国务院计量行政部门有权废除技术水平落后或者工作状况不适应需要的计量基准。
第七条 计量标准器具(简称计量标准,下同)的使用,必须具备下列条件:(一)经计量检定合格;(二)具有正常工作所需要的环境条件;(三)具有称职的保存、维护、使用人员;(四)具有完善的管理制度。
第八条 社会公用计量标准对社会上实施计量监督具有公证作用。县级以上地方人民政府计量行政部门建立的本行政区域内最高等级的社会公用计量标准,须向上一级人民政府计量行政部门申请考核;其他等级的,由当地人民政府计量行政部门主持考核。经考核符合本细则第七条规定条件并取得考核合格证的,由当地县级以上人民政府计量行政部门审批颁发社会公用计量标准证书后,方可使用。
第九条 国务院有关主管部门和省、自治区、直辖市人民政府有关主管部门建立的本部门各项最高计量标准,经同级人民政府计量行政部门考核,符合本细则第七条规定条件并取得考核合格证的,由有关主管部门批准使用。
第十条 企业、事业单位建立本单位各项最高计量标准,须向与其主管部门同级的人民政府计量行政部门申请考核。乡镇企业向当地县级人民政府计量行政部门申请考核。经考核符合本细则第七条规定条件并取得考核合格证的,企业、事业单位方可使用,并向其主管部门备案。

第三章 计量检定
第十一条 使用实行强制检定的计量标准的单位和个人,应当向主持考核该项计量标准的有关人民政府计量行政部门申请周期检定。使用实行强制检定的工作计量器具的单位和个人,应当向当地县(市)级人民政府计量行政部门指定的计量检定机构申请周期检定。当地不能检定的,向上一级人民政府计量行政部门指定的计量检定机构申请周期检定。
第十二条 企业、事业单位应当配备与生产、科研、经营管理相适应的计量检测设施,制定具体的检定管理办法和规章制度,规定本单位管理的计量器具明细目录及相应的检定周期,保证使用的非强制检定的计量器具定期检定。
第十三条 计量检定工作应当符合经济合理、就地就近的原则,不受行政区划和部门管辖的限制。

第四章 计量器具的制造和修理
第十四条 企业、事业单位申请办理《制造计量器具许可证》,由与其主管部门同级的人民政府计量行政部门进行考核;乡镇企业由当地县级人民政府计量行政部门进行考核。经考核合格,取得《制造计量器具许可证》的,准予使用国家统一规定的标志,有关主管部门方可批准生产。
第十五条 对社会开展经营性修理计量器具的企业、事业单位,办理《修理计量器具许可证》,可直接向当地县(市)级人民政府计量行政部门申请考核。当地不能考核的,可以向上一级地方人民政府计量行政部门申请考核。经考核合格取得《修理计量器具许可证》的,方可准予使用国家统一规定的标志和批准营业。
第十六条 制造、修理计量器具的个体工商户,须在固定的场所从事经营。申请《制造计量器具许可证》或者《修理计量器具许可证》,按照本细则第十五条规定的程序办理。凡易地经营的,须经所到地方的人民政府计量行政部门验证核准后方可申请办理营业执照。
第十七条 对申请《制造计量器具许可证》和《修理计量器具许可证》的企业、事业单位或个体工商户进行考核的内容为:(一)生产设施;(二)出厂检定条件;(三)人员的技术状况;(四)有关技术文件和计量规章制度。
第十八条 凡制造在全国范围内从未生产过的计量器具新产品,必须经过定型鉴定。定型鉴定合格后,应当履行型式批准手续,颁发证书。在全国范围内已经定型,而本单位未生产过的计量器具新产品,应当进行样机试验。样机试验合格后,发给合格证书。凡未经型式批准或者未取得样机试验合格证书的计量器具,不准生产。
第十九条 计量器具新产品定型鉴定,由国务院计量行政部门授权的技术机构进行;样机试验由所在地方的省级人民政府计量行政部门授权的技术机构进行。计量器具新产品的型式,由当地省级人民政府计量行政部门批准。省级人民政府计量行政部门批准的型式,经国务院计量行政部门审核同意后,作为全国通用型式。
第二十条 申请计量器具新产品定型鉴定和样机试验的单位,应当提供新产品样机及有关技术文件、资料。负责计量器具新产品定型鉴定和样机试验的单位,对申请单位提供的样机和技术文件、资料必须保密。
第二十一条 对企业、事业单位制造、修理计量器具的质量,各有关主管部门应当加强管理,县级以上人民政府计量行政部门有权进行监督检查,包括抽检和监督试验。凡无产品合格印、证,或者经检定不合格的计量器具,不准出厂。

第五章 计量器具的销售和使用
第二十二条 外商在中国销售计量器具,须比照本细则第十八条的规定向国务院计量行政部门申请型式批准。
第二十三条 县级以上地方人民政府计量行政部门对当地销售的计量器具实施监督检查。凡没有产品合格印、证和《制造计量器具许可证》标志的计量器具不得销售。
第二十四条 任何单位和个人不得经营销售残次计量器具零配件,不得使用残次零配件组装和修理计量器具。
第二十五条 任何单位和个人不准在工作岗位上使用无检定合格印、证或者超过检定周期以及经检定不合格的计量器具。在教学示范中使用计量器具不受此限。

第六章 计量监督
第二十六条 国务院计量行政部门和县级以上地方人民政府计量行政部门监督和贯彻实施计量法律、法规的职责是:(一)贯彻执行国家计量工作的方针、政策和规章制度,推行国家法定计量单位;(二)制定和协调计量事业的发展规划,建立计量基准和社会公用计量标准,组织量值传递;(三)对制造、修理、销售、使用计量器具实施监督;(四)进行计量认证,组织仲裁检定,调解计量纠纷;(五)监督检查计量法律、法规的实施情况,对违反计量法律、法规的行为,按照本细则的有关规定进行处理。
第二十七条 县级以上人民政府计量行政部门的计量管理人员,负责执行计量监督、管理任务;计量监督员负责在规定的区域、场所巡回检查,并可根据不同情况在规定的权限内对违反计量法律、法规的行为,进行现场处理,执行行政处罚。计量监督员必须经考核合格后,由县级以上人民政府计量行政部门任命并颁发监督员证件。
第二十八条 县级以上人民政府计量行政部门依法设置的计量检定机构,为国家法定计量检定机构。其职责是:负责研究建立计量基准、社会公用计量标准,进行量值传递,执行强制检定和法律规定的其他检定、测试任务,起草技术规范,为实施计量监督提供技术保证,并承办有关计量监督工作。
第二十九条 国家法定计量检定机构的计量检定人员,必须经县级以上人民政府计量行政部门考核合格,并取得计量检定证件。其他单位的计量检定人员,由其主管部门考核发证。无计量检定证件的,不得从事计量检定工作。计量检定人员的技术职务系列,由国务院计量行政部门会同有关主管部门制定。
第三十条 县级以上人民政府计量行政部门可以根据需要,采取以下形式授权其他单位的计量检定机构和技术机构,在规定的范围内执行强制检定和其他检定、测试任务:(一)授权专业性或区域性计量检定机构,作为法定计量检定机构;(二)授权建立社会公用计量标准;(三)授权某一部门或某一单位的计量检定机构,对其内部使用的强制检定计量器具执行强制检定;(四)授权有关技术机构,承担法律规定的其他检定、测试任务。
第三十一条 根据本细则第三十条规定被授权的单位,应当遵守下列规定:(一)被授权单位执行检定、测试任务的人员,必须经授权单位考核合格;(二)被授权单位的相应计量标准,必须接受计量基准或者社会公用计量标准的检定;(三)被授权单位承担授权的检定、测试工作,须接受授权单位的监督;(四)被授权单位成为计量纠纷中当事人一方时,在双方协商不能自行解决的情况下,由县级以上有关人民政府计量行政部门进行调解和仲裁检定。

第七章 产品质量检验机构的计量认证
第三十二条 为社会提供公证数据的产品质量检验机构,必须经省级以上人民政府计量行政部门计量认证。
第三十三条 产品质量检验机构计量认证的内容:(一)计量检定、测试设备的性能;(二)计量检定、测试设备的工作环境和人员的操作技能;(三)保证量值统一、准确的措施及检测数据公正可靠的管理制度。
第三十四条 产品质量检验机构提出计量认证申请后,省级以上人民政府计量行政部门应指定所属的计量检定机构或者被授权的技术机构按照本细则第三十三条规定的内容进行考核。考核合格后,由接受申请的省级以上人民政府计量行政部门发给计量认证合格证书。未取得计量认证合格证书的,不得开展产品质量检验工作。
第三十五条 省级以上人民政府计量行政部门有权对计量认证合格的产品质量检验机构,按照本细则第三十三条规定的内容进行监督检查。
第三十六条 已经取得计量认证合格证书的产品质量检验机构,需新增检验项目时,应按照本细则有关规定,申请单项计量认证。

第八章 计量调解和仲裁检定
第三十七条 县级以上人民政府计量行政部门负责计量纠纷的调解和仲裁检定,并可根据司法机关、合同管理机关、涉外仲裁机关或者其他单位的委托,指定有关计量检定机构进行仲裁检定。
第三十八条 在调解、仲裁及案件审理过程中,任何一方当事人均不得改变与计量纠纷有关的计量器具的技术状态。
第三十九条 计量纠纷当事人对仲裁检定不服的,可以在接到仲裁检定通知书之日起十五日内向上一级人民政府计量行政部门申诉。上一级人民政府计量行政部门进行的仲裁检定为终局仲裁检定。

第九章 费 用
第四十条 建立计量标准申请考核,使用计量器具申请检定,制造计量器具新产品申请定型和样机试验,制造、修理计量器具申请许可证,以及申请计量认证和仲裁检定,应当缴纳费用,具体收费办法或收费标准,由国务院计量行政部门会同国家财政、物价部门统一制定。
第四十一条 县级以上人民政府计量行政部门实施监督检查所进行的检定和试验不收费。被检查的单位有提供样机和检定试验条件的义务。
第四十二条 县级以上人民政府计量行政部门所属的计量检定机构,为贯彻计量法律、法规,实施计量监督提供技术保证所需要的经费,按照国家财政管理体制的规定,分别列入各级财政预算。

第十章 法律责任
第四十三条 违反本细则第二条规定,使用非法定计量单位的,责令其改正;属出版物的,责令其停止销售,可并处一千元以下的罚款。
第四十四条 违反《中华人民共和国计量法》第十四条规定,制造、销售和进口国务院规定废除的非法定计量单位的计量器具和国务院禁止使用的其他计量器具的,责令其停止制造、销售和进口,没收计量器具和全部违法所得,可并处相当其违法所得百分之十至百分之五十的罚款。
第四十五条 部门和企业、事业单位和各项最高计量标准,未经有关人民政府计量行政部门考核合格而开展计量检定的,责令其停止使用,可并处一千元以下的罚款。
第四十六条 属于强制检定范围的计量器具,未按照规定申请检定和属于非强制检定范围的计量器具未自行定期检定或者送其他计量检定机构定期检定的,以及经检定不合格继续使用的,责令其停止使用,可并处一千元以下的罚款。
第四十七条 未取得《制造计量器具许可证》或者《修理计量器具许可证》制造、修理计量器具的,责令其停止生产、停止营业,封存制造、修理的计量器具,没收全部违法所得,可并处相当其违法所得百分之十至百分之五十的罚款。
第四十八条 制造、销售未经型式批准或样机试验合格的计量器具新产品的,责令其停止制造、销售,封存该种新产品,没收全部违法所得,可并处三千元以下的罚款。
第四十九条 制造、修理的计量器具未经出厂检定或者经检定不合格而出厂的,责令其停止出厂,没收全部违法所得;情节严重的,可并处三千元以下的罚款。
第五十条 进口计量器具,未经省级以上人民政府计量行政部门检定合格而销售的,责令其停止销售,封存计量器具,没收全部违法所得,可并处其销售额百分之十至百分之五十的罚款。
第五十一条 使用不合格计量器具或者破坏计量器具准确度和伪造数据,给国家和消费者造成损失的,责令其赔偿损失,没收计量器具和全部违法所得,可并处二千元以下的罚款。
第五十二条 经营销售残次计量器具零配件的,责令其停止经营销售,没收残次计量器具零配件和全部违法所得,可并处二千元以下的罚款;情节严重的,由工商行政管理部门吊销其营业执照。
第五十三条 制造、销售、使用以欺骗消费者为目的的计量器具的单位和个人,没收其计量器具和全部违法所得,可并处二千元以下的罚款;构成犯罪的,对个人或者单位直接责任人员,依法追究刑事责任。
第五十四条 个体工商户制造、修理国家规定范围以外的计量器具或者不按照规定场所从事经营活动的,责令其停止制造、修理,没收全部违法所得,可并处以五百元以下的罚款。
第五十五条 未取得计量认证合格证书的产品质量检验机构,为社会提供公证数据的,责令其停止检验,可并处一千元以下的罚款。
第五十六条 伪造、盗用、倒卖强制检定印、证的,没收其非法检定印、证和全部违法所得,可并处二千元以下的罚款;构成犯罪的,依法追究刑事责任。
第五十七条 计量监督管理人员违法失职,徇私舞弊,情节轻微的,给予行政处分;构成犯罪的,依法追究刑事责任。
第五十八条 负责计量器具新产品定型鉴定、样机试验的单位,违反本细则第二十条第二款规定的,应当按照国家有关规定,赔偿申请单位的损失,并给予直接责任人员行政处分;构成犯罪的,依法追究刑事责任。
第五十九条 计量检定人员有下列行为之一的,给予行政处分;构成犯罪的,依法追究刑事责任:(一)伪造检定数据的;(二)出具错误数据,给送检一方造成损失的;(三)违反计量检定规程进行计量检定的;(四)使用未经考核合格的计量标准开展检定的;(五)未取得计量检定证件执行计量检定的。
第六十条 本细则规定的行政处罚,由县级以上地方人民政府计量行政部门决定。罚款一万元以上的,应当报省级人民政府计量行政部门决定。没收违法所得及罚款一律上缴国库。本细则第五十一条规定的行政处罚,也可以由工商行政管理部门决定。

第十一章 附 则
第六十一条 本细则下列用语的含义是:(一)计量器具是指能用以直接或间接测出被测对象量值的装置、仪器仪表、量具和用于统一量值的标准物质,包括计量基准、计量标准、工作计量器具。(二)计量检定是指为评定计量器具的计量性能,确定其是否合格所进行的全部工作。(三)定型鉴定是指对计量器具新产品样机的计量性能进行全面审查、考核。(四)计量认证是指政府计量行政部门对有关技术机构计量检定、测试的能力和可靠性进行的考核和证明。(五)计量检定机构是指承担计量检定工作的有关技术机构。(六)仲裁检定是指用计量基准或者社会公用计量标准所进行的以裁决为目的的计量检定、测试活动。
第六十二条 中国人民解放军和国防科技工业系统涉及本系统以外的计量工作的监督管理,亦适用本细则。
第六十三条 本细则有关的管理办法、管理范围和各种印、证标志,由国务院计量行政部门制定。
第六十四条 本细则由国务院计量行政部门负责解释。
第六十五条 本细则自发布之日起施行。(附英文)

RULES FOR THE IMPLEMENTATION OF THE METROLOGY LAW OF THE PEOPLE'SREPUBLIC OF CHINA

Important Notice: (注意事项)
英文本源自中华人民共和国务院法制局编译, 中国法制出版社出版的《中华人民
共和国涉外法规汇编》(1991年7月版).
当发生歧意时, 应以法律法规颁布单位发布的中文原文为准.
This English document is coming from the "LAWS AND REGULATIONS OF THE
PEOPLE'S REPUBLIC OF CHINA GOVERNING FOREIGN-RELATED MATTERS" (1991.7)
which is compiled by the Brueau of Legislative Affairs of the State
Council of the People's Republic of China, and is published by the China
Legal System Publishing House.
In case of discrepancy, the original version in Chinese shall prevail.

Whole Document (法规全文)
RULES FOR THE IMPLEMENTATION OF THE METROLOGY LAW OF THE PEOPLE'S
REPUBLIC OF CHINA
(Approved by the State Council on January 19, 1987 and promulgated
by the State Measurement Bureau on February 1, 1987)

Chapter I General Provisions
Article 1
These Rules are formulated according to the provisions of the Metrology
Law of the People's Republic of China.
Article 2
A system of legal measures is implemented in the country. The procedures
for designating the names and symbols of legal measurement units and for
abolishing the non-legal measurement units shall be implemented according
to the relevant stipulations of the State Council concerning uniform
application of legal measures in our country.
Article 3
The State develops measurement facilities in a planned way and fits out
measurement agencies at various levels with modern technology and
equipment so that they may serve to promote China's socialist
modernizations, provide measurement guarantee for our industrial and
agricultural production, the building up of our national defence,
scientific experiments, domestic and foreign trade and the people's health
and safety, and protect the interests of the State and the people.

Chapter II Datum Instruments of Measurement and Standard Instru- ments of Measurement
Article 4
The following requirements must be met in using datum instruments of
measurement (hereinafter referred to as datum instruments):
(1) they must pass the appraisement of the State;
(2) there must be such environmental conditions as required for their
normal operations;
(3) there must be competent personnel in charge of their safekeeping,
maintenance and application;
(4) there must be a perfect system of administration.
Those units which meet the above-mentioned requirements can use datum
instruments only after they pass the examination and approval by the
Measurement Administration under the State Council and receive the
relevant certificate from it.
Article 5
No unit or individual shall dismantle or refit datum instruments or
suspend the work concerning measurement examination and determination
without the approval of the Measurement Administration under the State
Council.
Article 6
The measurement values of the datum instruments should be the same as
international measurement values. The Measurement Administration under the
State Council has the right to abolish those datum instruments which are
backward in technology or those instruments whose performance cannot meet
the present requirements.
Article 7
The following requirements must be met in using standard instruments of
measurement (hereinafter referred to as standard instruments):
(1) they must pass measurement examination and determination;
(2) there must be such environmental conditions as required for their
normal operations;
(3) there must be competent personnel in charge of their safekeeping,
maintenance and application;
(4) there must be a perfect system of administration.
Article 8
Public standard instruments function as notaries in exercising measurement
supervision in the society. In designating the public standard instruments
of the highest class in the local areas, the administrative departments
for measurement in the people's governments above the county level must
apply to the measurement departments immediately above its own level for
examination. The examination of public standard instruments of other
classes may be conducted under the direction of the administrative
departments for measurement of the local people's governments.
Those public standard instruments, which have proved up to the
requirements laid down in Article 7 of these Rules and obtained
certificates of examination, shall be used only after the relevant
certificates are issued after the examination and approval by the
administrative departments for measurement of the people's governments
above the county level.
Article 9
The standard instruments of the highest class in various fields should be
designated by the relevant competent departments under the State Council
and by those in the people's governments in the provinces, autonomous
regions and the municipalities directly under the Central Government.
These standard instruments must pass the examination by the administrative
department for measurement in the people's governments at the same level
and those instruments which meet the requirements provided for in Article
7 of these Rules and obtain certificates of examination may be used only
after the approval by the relevant competent departments.
Article 10
In designating various standard instruments of the highest class for their
own units, enterprises and institutions must apply for examination to the
administrative departments for measurement which are at the same levels as
their competent departments in the people's governments. Township
enterprises should apply for examination to the administrative departments
for measurement in the local people's governments at the county level.
Those instruments which meet the requirements provided for in Article 7 of
these Rules and obtain certificates of examination may be used by the
relevant enterprises and institutions, which should report to their
competent authorities for the record.

Chapter III Measurement Examination and Determination
Article 11
The units and individuals using standard instruments which have gone
through compulsory examination and determination should apply for periodic
examination and determination to the relevant administrative department
for measurement of the people's government which has been responsible for
examining the instruments.
The units and individuals using the working measurement instruments which
have gone through compulsory examination and determination should apply
for periodic examination and determination to the relevant measurement
examination and determination agencies designated by the administrative
departments for measurement of the local people's governments at the
county (municipality) level. If it cannot be done locally, it is necessary
to apply for periodic examination and determination to the measurement
examination and determination agencies designated by the next higher
administrative departments.
Article 12
Enterprises and institutions should equip themselves with the facilities
for checking and testing measurement instruments commensurate with their
needs in production, scientific research and management and business
operations, formulate specific procedures and regulations concerning
examination and determination, work out detailed catalogues of measurement
instruments of their units and fix the corresponding periods for
examination and determination, and ensure that their measurement
instruments which are not subject to compulsory examination and
determination are regularly checked and tested.
Article 13
The work of measurement examination and determination shall be conducted
on the principle of economy, rationality and geographical proximity, and
it should not be restricted by administrative divisions and departmental
jurisdiction.

Chapter IV Manufacture and Repair of Measurement Instruments
Article 14
Enterprises and institutions applying for Licences for Manufacturing
Measurement Instruments should pass the examination by the administrative
departments for measurement at the same levels with the competent
authorities of the people's governments in their localities. Township
enterprises should be examined by the administrative departments for
measurement of the local people's governments at the county level. Those
enterprises and institutions which have obtained Licences for
Manufacturing Measurement Instruments by passing the examination are
allowed to use the uniform marks stipulated by the State. Only then may
the relevant competent authorities approve of their production.
Article 15
Enterprises and institutions which do business in measurement instruments
repairs may apply for examination directly to the administrative
departments for measurement of the local people's governments at the
county (municipality) level in order to obtain the Licence for Repairing
Measurement Instruments. If it cannot be done locally, applications for
examination may be submitted to the administrative departments for
measurement of the people's governments at the next higher level. Only
those enterprises and institutions which have obtained Licence for
Repairing Measurement Instruments by passing the examination may be
allowed to use the uniform marks stipulated by the State and start
business operations.
Article 16
The individual industrial and commercial businesses which are engaged in
manufacturing or repairing measurement instruments must have regular
business premises. Those which want to apply for the Licence for
Manufacturing Measurement Instruments or the Licence for Repairing
Measurement Instruments may do so according to the procedures provided for
in Article 15 of these Rules. If they move to do business in other places,
they must send the original licence to the administrative department for
measurement of the local people's government where they have moved, for
verification and approval before they can apply for new business licences.
Article 17
The examination for enterprises, institutions or individual industrial and
commercial businesses which apply for the Licence for Manufacturing
Measurement Instruments and the Licence for Repairing Measurement
Instruments consists of the following items:
(1) production facilities;
(2) facilities for testing and determining products;
(3) technical levels of the workers and staff members;
(4) relevant technical documents and regulations and rules concerning
measurements.
Article 18
The product design of a new measurement instrument, which has never been
produced in the country, must be appraised before it can be manufactured.
When the product design has been finalized, it is necessary to go through
formalities of model approval and obtain the relevant certificate. New
products whose designs have been finalized in the country but have never
been produced by the producer must be tested and their prototypes be made.
A certificate of quality shall be issued after the test of prototype is
passed. Those measurement instruments which have not obtained model
approval or certificates of quality of their prototypes shall not be
allowed to be produced.
Article 19
The product design appraisement of a new measurement instrument shall be
conducted by the technical agency authorized by the measurement
administration under the State Council. Prototypes of the instrument shall
be tested by the technical agency authorized by the administrative
department for measurement of the local people's government at the
provincial level.
The models of new measurement instruments shall be approved by the
administrative departments for measurement of the local people's
governments at the provincial level. The models approved by such
departments can be used as nationally applicable models after they have
been finalized by the measurement administration under the State Council.
Article 20
The Units applying for model design appraisement for a new measurement
instrument and prototype testing should provide a prototype of the new
product, and the relevant technical documents and data.
The units responsible for the appraisement and testing must withhold
secret of the prototype, the technical documents and data provided by the
applicants.
Article 21
The various relevant competent authorities should strengthen control over
the quality of the measurement instruments manufactured and repaired by
the enterprises and institutions. The administrative departments for
measurement in the people's governments above the county level are
empowered to carry out supervision and inspection, including sampling and
supervised testing. The measurement instruments without stamps or
certificates of quality or those measurement instruments which have failed
to pass the examination and determination shall not be allowed to leave
the factories.

Chapter V Marketing and Use of Measurement Instruments
Article 22
Foreign businessmen selling measurement instruments in China must apply
for model approval to the measurement administration under the State
Council according to the provisions in Article 18 of these Rules.
Article 23
The administrative departments for measurement of the people's governments
above the county level exercise supervision and inspection over the
measurement instruments sold locally. The instruments without quality
stamps or certificates of quality or the marks of the Licence for
Manufacturing Measurement Instruments may not be marketed.
Article 24
No units or individuals may deal in rejected or defective spares and
components of measurement instruments or use them in assembling and
repairing measurement instruments.
Article 25
No units or individuals may use in their work the measurement instruments
without quality stamps or certificates of examination and determination or
those instruments which have exceeded the period of examination and
determination or those instruments which have been rejected in examination
and determination. This provision does not apply to the measurement
instruments used in teaching demonstration.

Chapter VI Measurement Supervision
Article 26
The responsibilities of the measurement administration under the State
Council and the administrative departments for measurement of the local
people's governments above the county level in the supervision over and
implementation of the laws and regulations concerning measurement are as
follows:
(1) carrying out the State policies, measures and regulations concerning
measurement and promoting the adoption of the State legal measurement
units;
(2) making and coordinating development plans for measurement
undertakings, designating datum instruments and public standard
instruments, organizing the transmission of measurement values;
(3) exercising supervision over the manufacturing, repairing, marketing
and using of measurement instruments;
(4) conducting measurement attestation, organizing arbitration over
examination and determination and mediating disputes over measurement;
(5) supervising and checking the implementation of measurement laws and
regulations, and dealing with violations of these laws and regulations in
accordance with the relevant provisions of these Rules.
Article 27
The measurement control personnel at the administrative departments for
measurement of the people's governments above the county level are
responsible for measurement supervision and administration. Measurement
inspectors are responsible for circuit checking in the prescribed areas
and places and may, within their stipulated authority, deal, on the spot,
with violations of measurement laws and regulations and mete out
administrative sanctions on the merit of each case.
Measurement inspectors must pass the examination supervised by the
administrative departments for measurement of the people's governments
above the county level, which shall appoint the inspectors and issue
relevant certificates.
Article 28
The agencies for measurement examination and determination set up
according to law by the administrative departments for measurement of the
people's governments above the county level are legal agencies of the
State. Their responsibilities are: designating datum instruments and
public standard instruments, conducting transmission of measurement
values, carrying out compulsory examination and determination as well as
other examination and determination and testing prescribed by law,
drafting regulations concerning technical specifications to provide
technical guarantee for exercising measurement supervision and handling
other matters concerning measurement supervision.
Article 29
The personnel in charge of measurement examination and determination in
the State legal agencies for measurement examination and determination
must pass the examinations supervised by the administrative departments
for measurement of the people's governments above the county level and
must obtain the necessary certificates. The personnel in charge of
measurement examination and determination in other units should pass the
examinations supervised by their higher competent authorities and obtain
the relevant certificates. People without the certificates for measurement
examination and determination may not do the work in this field. The
grading of the technical posts of the personnel in charge of measurement
examination and determination shall be stipulated by the measurement
administration under the State Council in conjunction with the relevant
competent authorities.
Article 30
The administrative departments for measurement of the people's governments
above the county level may, in the light of actual needs, authorize the
agencies of measurement examination and determination and technical
agencies in the following ways to conduct compulsory examination and
determination and other kinds of examination and determination and testing
within the prescribed scope:
(1) authorizing professional or regional agencies for measurement
examination and determination to act as legal agencies;
(2) authorizing the designation of public standard instruments;
(3) authorizing the agencies for measurement examination and determination
of certain departments or units to conduct compulsory examination and
determination of the relevant measurement instruments used therein;
(4) authorizing relevant technical agencies to undertake the other tasks
of examination and determination and testing prescribed by law.
Article 31
Units which have been authorized in accordance with the provisions of
Article 30 of these Rules should abide by the following stipulations:
(1) the personnel in charge of examination and determination and testing
in the authorized units must pass the examinations supervised by the
authorizing units;
(2) the corresponding measurement standards of the authorized units must
be examined and determined according to the datum instruments or the
public standard instruments;
(3) the authorized units must conduct the authorized work of examination
and determination and testing under the supervision of the authorizing
units;
(4) administrative departments for measurement of the people's governments
above county level shall conduct mediation and arbitration when the
authorized units become a party to a measurement dispute, which cannot be
settled by the parties themselves through consultation.

Chapter VII Measurement Attestation of Agencies for Examination of Product Quality
Article 32
The agencies for examination of product quality which provide the society
with notarization data must be attested by administrative departments for
measurement of the people's governments above provincial level.
Article 33
Measurement attestation of agencies for examination of product quality
covers the following aspects:
(1) examining and determining measurements and testing the function of
equipment;
(2) examining and determination measurements and testing the environmental
conditions for the functioning of the equipment and the personnel's
operational skills;
(3) measures ensuring the uniformity of measurement values and accuracy,
and systems ensuring the equity and reliability of the data for
examination and determination of measurements.
Article 34
After receiving applications for attestation from agencies for examination
of product quality, administrative departments for measurement of the
people's governments above provincial level shall instruct the measurement
examination agencies under their jurisdiction or the authorized technical
agencies to arrange the examinations for the applicants in accordance with
the provisions of Article 33 of these Rules. The administrative
departments for measurement of the people's governments above provincial
level shall issue certificates for measurement attestation to those
applicants who have passed the examinations. Those who have not obtained
the certificates shall not be allowed to conduct examination of product
quality.
Article 35
Administrative departments for measurement of the people's governments
above provincial level are empowered to conduct supervision and inspection
over those agencies which have obtained certificates for measurement
attestation according to the provisions of Article 33 of these Rules.
Article 36
Agencies for examination of product quality which have obtained a
certificate for measurement attestation should apply for separate
confirmation of measurement attestation for new items, if they deem these
additional examinations necessary, according to the relevant provisions of
these Rules.

Chapter VIII Measurement Mediation and Arbitrative Examination and Determination
Article 37
Administrative departments for measurement of the people's governments
above county level are responsible for mediation and arbitrative
examination and determination for measurement disputes and may appoint
relevant agencies for measurement examination and determination to conduct
arbitrative examination and determination as entrusted by judicial organs,
administrative organs for contracts, arbitration agencies dealing with
cases involving foreign parties, or other organizations.
Article 38
No litigant shall change the technical status of the measurement
instruments involved in the dispute in the course of the mediation,
arbitration and hearing of the cases.
Article 39
If a party rejects the arbitrative examination and determination, it may
appeal to the administrative departments for measurement of the people's
governments at the next higher level within 15 days of receipt of the
notice of the arbitrative examination and determination. The arbitrative
examination and determination by the administrative departments for
measurement of the next higher people's governments shall be final.

Chapter IX Fees
Article 40
Fees shall be paid for applications for examinations to designate standard
measurement instruments, applications for examination and determination of
measurement instruments to be used, applications for model approval and
prototype instrument testing for manufacturing new measurement products,
applications for the licence for manufacturing and repairing measurement
instruments and applications for measurement attestation and arbitrative
examination and determination. Actual procedures or rates of charges shall
be worked out by the measurement administration under the State Council in

不分页显示   总共2页  1 [2]

  下一页

关于对“企业会计制度”有关问题的复函

财政部会计司


关于对“企业会计制度”有关问题的复函


财会便[2002]53号

中国注册会计师协会:

你会转来会计师事务所关于上市公司执行《企业会计制度》的有关问题收悉,现就有关问题答复如下:

一、关于应收款项与应收款项及其他资产交换的会计处理问题。我们认为,应收款项属现金资产,但以应收款项与应收款项及其他资产进行交换时,《企业会计制度》作了特别规定,即企业以应收款项换入包括应收款项在内的多项资产的情况(不涉及补价),按照换入应收款项的原账面价值作为换入应收款项的入账价值,除应收款项以外的其他资产的入账价值,按照换入其他资产公允价值占换入的全部其他资产的公允价值总额的比例,对换出全部资产的账面价值总额加上应支付的相关税费,减去换入的应收款项入账价值后的余额进行分配。对评估日至资产交接日之间的流动资产的变动如何处理,应视双方合同及具体交易情况而定。

对于换入的应收款项中换出企业已计提的坏账准备且计提方法和比例与换入企业应收款项坏账准备的计提方法和比例不同的,企业应考虑对换入的应收款项原计提的坏账准备的比例和方法的合理性,并确定应提的坏账准备,企业换出的应收款项,减去换入应收款项原账面余额和确定的坏账准备后的差额,在除应收款项以外的其他资产中进行分配。

二、关于以部分资产和负债对外投资初始投资成本确定的问题。《企业会计制度》和《企业会计准则——非货币性交易》中规定,企业以非现金资产对外投资作为非货币性交易处理,以投出非现金资产的账面价值作为股权投资的初始投资成本。对于以部分资产、负债出资,应比照上述原则处理,即以投资出资产、负债的账面价值作为股权投资的初始投资成本。

三、关于涉及补价的非货币性交易应确认的收益中扣除的相关税费是否含除教育费附加外的其他费用的问题。我们认为,与非货币性交易相关的除教育费附加以外的其他费用可在发生时直接计入当期损益,不需要按比例抵减非货币性交易应确认的收益。

四、关于房地产开发企业销售收入确认问题。我们认为,《企业会计制度》中已作出规定,即在没有建造合同的情况下,房地产开发企业开发商品房对外销售收入的确定,应满足商品销售收入确认的四项条件,在未满足四个条件的情况下,不得确认为收入。

财政部会计司
二00二年九月三十日